GP-PWM-10
_________________________________________________________________________________
10
© 2017 Go Power!®
7.0 Operating Instructions
7.1 Power Up
When
the GP-PWM-10 is connected to the battery, the controller will go
into Power Up mode.
Icons Displayed
: All
segments of the numerical
display; Backlight blinks
Depending on the battery
voltage when the GP-PWM-
10 Power Up occurs, the
controller may do a Boost
Charge or quickly go into
Float Charge. The Charging
Profile selected will
commence the following day
after a Power Up (refer to the
Charging Profile Chart on
page 11 for more details).
7.2 Setting the Battery Charging Profile
To select the battery charging
profile, press and hold the
B
Button
. This will cause the
current battery type to flash.
Then, press the
B Button
to
toggle through the profile
options: Sealed/Gel,
AGM/LiFePO
4
or Flooded.
