gpelectric.com | page 7
7
JP1
The JP1 is to set either the Return Override function or the Ignition Lockout
function.
•
JP1 jumper “Short” - Return Override function:
Turns ON the inverter when the auxiliary input wiring is connected to the
reversed gear shift with 12 volts.
•
JP1 jumper “Open” - Ignition Lockout function:
Turns OFF the inverter when the auxiliary input wiring is connected to the ACC
with 12 volts.
•
The connector which is connected to AUX power must be used with a 12V /
0.5A fuse.
Triggered signal
JP1
Inverter Status
AUX
1
Open
OFF
0
Open
ON
1
Short
ON
0
Short
OFF
Note: default mode is Open.
4. INTRODUCTION
