background image

 

 

 

Go Power! DC Install Kit 

Owner’s Manual 

 

 
 
 

 

1. Warnings 

Avoid all electrical hazards.

 Disconnect batteries and electrical system from 120/240 

VAC, or any other power source of electrical power, before attempting to install your 

Go 

Power! GP-DC Install Kit

.  

 

Observe proper polarity

 throughout the installation process. 

 

Work safely.

 Do not wear jewelry when working with electrical or mechanical equipment. 

Use protective eyewear, gloves and apron when working with batteries. 
 

Follow the safety precautions

 of the battery manufacturer. Do not produce sparks 

when working in locations where flammable gases or vapors exist. Shield skin and eyes 
from battery acid.  If skin, eyes or clothing comes in contact with acid rinse thoroughly 
with water. 

 

Avoid electrical shock

. Make sure all sources (inverter, shore power, generator) are 

disconnected. 

2. Installation Overview 

Congratulations on becoming the owner of a GP–DC Kit.  Please read and understand all 
instructions before installing your new product for the easiest and safest installation.  
Before installing kit, review the installation design with this DC kit Installation Manual.  
Contact your Authorized Go Power! Dealer if in doubt as to this kit's suitability or 
compatibility with your system.  Retain this guide for future reference. 

2.1  Disclaimer of Liability & Warranty  

The conditions or methods of installation, operation, use and maintenance of this kit and 
its solar module are beyond the control of Carmanah Technologies Corp. Carmanah 
does not assume responsibility and expressly disclaims liability for loss, damage, or 
expense arising from, or in any way connected with such installation, operation, use, or 
maintenance.  

Carmanah does not cover labor or shipping for items returned.

 

 

3. Installation  

1.  The inverter fuse is to be mounted on the positive cable near the battery. 
 
2.  Cut the positive (red) cable according to desired location.   Strip ½” to ¾” of 

insulation from the cables, and connect the fuse block as shown.

 

Technical Support:

 [email protected] 

Toll Free (US & Canada):

 1-800-667-6527 

Toll Free Fax:

 1-866-607-6527 

 

53498 

 

 

Отзывы: