Go Power Dura Lite Solar Controller, Руководство пользователя, Страница: 9 / 17

SOLAR CONTROLLER
_______________________________________________________________________
9
© 2020 Go Power!
Boost Reconnect
Charging Voltage
13.2V 13.2V 13.2V 13.2/26.4V
Low Voltage Reconnect
Voltage
12.6V 12.6V 12.6V 12.2/24.4V
Under Voltage Warning
Reconnect Voltage
12.2V 12.2V 12.2V 12.4/28.8V
Under Volt. Warning
Volt.
12.0V 12.0V 12.0V 12.0/24.0V
Low Volt. Disconnect Volt. 11.1V
11.1V 11.1V 11.0/22.0V
Discharging Limit Voltage 10.6V
10.6V 10.6V 10.5/21.0V
Equalize Duration 120min. —— 120min. ——
Boost Duration 120min. 120min. 120min. 120min.
1. When the battery type is sealed, gel, flooded, the adjusting range of
equalizing duration is 0 to180min and boost duration is 10 to180min.
2. When setting a lithium battery type, (for example: a LiFePO
4
) use these rules
when setting voltage parameters.
•
Ov er Voltage Disconnect Voltage > Charging Limit Voltage ≥ Equalize
Charging Voltage ≥ Boost Charging Voltage ≥ Float Charging Voltage >
Boost Reconnect Charging Voltage.
• Over Voltage Disconnect Voltage > Over Voltage Reconnect Voltage
•
Low Voltage Reconnect Voltage > Low Voltage Disconnect Voltage ≥
Discharging Limit Voltage.
• Under Voltage Warning Reconnect Voltage > Under Voltage Warning
Voltage ≥ Discharging Limit Voltage.
•
Boost Reconnect Charging voltage > Low Voltage Disconnect Voltage.
6.0
Errors & Troubleshooting
No Power to LCD Screen
Solution 1
Check the connection between the DuraLite Kit and the controller, and the
controller and the battery. The controller requires a minimum voltage of 8v to run.