SOLAR CONTROLLER
_______________________________________________________________________
4
© 2020 Go Power!
1.5
Specifications
Description
Value
Dimensions (H x W x D):
178.5 × 105.5 × 48.3mm
7.02 x 4.15 x 1.90 in
Weight: 300g / 10.6 oz
Recommended Wire
Gauge:
#8 AWG
Warranty: 5 years
•
PWM Charging
•
4 Battery Charging
profiles
•
4 Stage Charging
•
Displays Charging
Current, Battery
Voltage and Battery
State of Charge
•
Reverse Polarity
protected
•
Temperature
Compensated
•
RoHS Compliant,
environmentally safe
•
Accepts up to 3
DuraLite Kits (300
watts of solar at 12
volts)
Nominal System Voltage
12 VDC
Charging Output Voltage
Range Battery 1
9.0 – 14.9 VDC
Battery Input
Voltage Range
8V
～
32V
Rated Charge Current
30A
Max. PV Short Circuit
Current
30A
Max. PV Open
Circuit Voltage
50V
Battery Type
Sealed (AGM), Gel, Flooded,
Lithium 1 (12V), and Lithium 2 (24V)
Self-consumption
≤4.2mA/12V;≤2.6mA/24V
Temperature
Compensate Coefficient
-3mV/
℃
/2V(Default)
Charge Circuit
Voltage Drop
0.21V
Operating Consumption
(Display backlight on)
15mA
Operating Consumption
(Display backlight off)
6mA
Battery Types Supported
Vented and Sealed (GEL, AGM etc.)
Lead Acid
Protections
Battery Reverse Polarity, PV Reverse
Polarity, Over Temperature, PV Short
Circuit, PV Over Current, PV Over
Voltage,
2.0
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
THIS MANUAL CONTAINS IMPORTANT INSTRUCTIONS FOR THE
DURALITE KIT AND SOLAR CONTROLLER THAT SHOULD BE
FOLLOWED DURING KIT USE AND MAINTENANCE.
•
Read this manual in its entirety before using the DuraLite kit for
the first time.
•
DO NOT GET WET. Bring in the DuraLite kit when it rains.
•
Use only with approved DuraLite connections and harnessing.