GMW IPP 144-40 GS Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 40

GMW IPP 144-40 GS Скачать руководство пользователя страница 11

Possible errors

If there is no printout or if the printout is incorrect, verify the following:

- Has the paper run out? The end of paper is indicated by the „Alarm“
LED.
- Did you insert the paper properly?
- Do the baud rate, parity and word length of both units correspond?
- Is the data cable disconnected? Does the pin assignment
correspond to the description?
- Is the setting „RS232/TTY“ correct?
- Is the transmitter transmitting? It can be tested electically on the
printer line RxD by means of a measuring device.

The menu cannot be printed:

- Is the voltage supply correct? By pressing the „Line Feed“ key, the
paper scroll one line.

Blank lines appear without any reason:

- Text coming from the transmitter has more than 48 characters per
line (24 in wide font). Blank characters are probably presnet
between the text and character <CR>. The number of characters
must be restricted to 48 (or 20) characters per line.

Accessories

Spare paper:

- 80mm document grade: item munber 49234 86910
Contains: 10 rolls.

Cable:

-The Printer can be connected to all cable of the PT 88 (Siemens
desktop printer) via the screw-in adapter. The appropriate
designation can be found in the Siemens catalogue.
item mumber 27866 79461

Paper re-roll mechanism:

Item number 57200 00000

The IPP-AW is a paper re-roll device specially designed for use with the
IPP 144-40 GS. It can be installed directly underneath the printer. The
printed paper is automatically wound onto a drum by a motor. All pull-out
front panel allows easy paper handling (insertion, removing).

9

«
...
9
10
11
12
13
...
»

Содержание IPP 144-40 GS









































Отзывы:

Нет отзывов