GMW 5971-160, Руководство пользователя, Страница: 18 / 39

5.2.8 - Data Logging
There are a few things to set up in order to use the data logger:
1. Push the ‘Create Log File’ button. This will open a dialog box that will prompt
for the file name of the log file. If the file exists, it will prompt for confirmation
to over write the existing file.
2. Enter a log file sample interval (in mili-seconds). Set to 0 to log every sample.
Note at this time, data is NOT being logged.
3. To start the logging, click on the green ‘Start Logging’ button. The button will
then change to a red ‘Pause Logging’ Button.
4. To stop or pause the logging, click on the red ‘Pause Logging’ button. The button
will change back to the green ‘Start Logging’ button.
5. To close the log file, click on the ‘Close Log File’ button.
Creating the Log File