GMW 5971-160, Руководство пользователя, Страница: 13 / 39

5.2.2 - Software Configuration
Upon the first run of the software, a simple configuration screen will be presented. Select
the DC Power Supply type from the provided list. If the power supply that is being used
is not listed, enter the maximum voltage and current of the DC Power Supply that you
have. Then select the address of the USB-6251 DAQ from the list. You may also enter
the default directory to be used for storing data generated from the data logger.
Save and exit the configuration screen.
Configuration Screen
5.2.3 - Basic Operation
Once configured, the normal operation screen will be presented. This screen provides
control of current and polarity and monitoring of the DC Power Supply’s output voltage
and current. It also provides status read back of the Reversal Switch and Electromagnet
interlock status.
It is important to note that when operating remotely, the DC Power Supply front
panel controls be set as follows: Voltage to Maximum, Current to zero. If this is
not done, the DC Power Supply will be voltage limited and full output current
may not be achieved.