GMS B36, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 29

B36
14
2 P2 It ensures settings for protector bending
3 P3 It ensures settings for hook bending
4 Left-Right It changes machine's rotation direction to left or right.
5 Man-Auto It provides machine to be controlled automatically and manually.
6 Program OFF
Machine operates in normal mode. The bending is made
according to the preferred angle.
6 Program On Programming Mode of the Machine
7 ON It provides machine system to engage.
8 OFF It ensures switching the machine system off.
9 Power Lamp
It indicates that there is electricity on the system when electricity
is supplied to the system when ON button is pressed.
10 Foot Pedal It ensures rotation of bending flange.
11.1. Thermal flow setting range and motor protection switch
For a motor of 1.5 kW 1440 rpm it is set 5 A by machine manufacturer. It is not appropriate for
user to change settings. Motor protection switch is mounted to the machine in order to prevent damage
on the system by cutting the electricity current when excessive current is drawn by the system. If the
switch is tripped switch should be turned on by turning the button to position 1. Motor protection
switch should never be disassembled.