3985 S. Fletcher Road ∙ Chelsea, MI 48118
(800) 396-4642 ∙ Fax (734) 428-7672
www.greenemfg.com
TG-GMR DESK
TOOLS REQUIRED FOR ASSEMBLY
Electric Hand Drill, Phillips Head Bit, 3/8” Magnetic Hex
Driver Bit, Socket Set and Ratchet.
BEFORE ASSEMBLING THE WORKBENCH
Read through the assembly instructions to familiarize your-
self with the order in which the parts are assembled.
We suggest that you clear & vacuum the area where the
bench is to be assembled.
It is important that the bench is assembled in the same
sequence as instructed.
HARDWARE
All assembly hardware is provided.
On a clean surface or blanket lay the top bottom side up.
Attach the legs using (6) #14 x 1” lag bolts per leg.
STEP 1
#14 x 1”
Lag Bolt
Attach the top support brace using (14) #10 x 5/8” SPAX
wood screws. Center the brace between the two legs.
STEP 2
#10 x 5/8”
SPAX Wood Screw
Attach the modesty panel using (6) #10 x 5/8” SPAX wood
screws. Once attached, flip the table right side up.
STEP 3
#10 x 5/8”
SPAX Wood Screw
x14
x6
x12
