manualshive.com logo in svg

GMI Gasurveyor 500 Series, Руководство пользователя

Поделиться
Скачать
GMI Gasurveyor 500 Series Скачать руководство пользователя страница 46

GASURVEYOR 500 USER HANDBOOK

4-4

Recharging the Battery Pack

The battery pack should be recharged in the following
situations:

The BAT or BAT FAULT message is displayed.

The instrument will not switch on.

The pump will not switch on.

It is recommended that the battery pack is fully discharged
on a regular basis (once every three months). This can
be done by running the instrument continuously or using
the battery conditioning facility on the Smart Charger. The
batteries can be charged on the instrument but the
instrument itself should be switched off. Regular complete
discharge will keep the battery pack in good condition.

Replacing Alkaline (LR20) Dry Cell
Batteries

All four batteries should be replaced at any one time and
in a safe area. GMI only recommend the use of Energiser
or Duracell batteries.

1) Loosen the two instrument base screws (4mm

hex) using the special tool provided.

Содержание Gasurveyor 500 Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды