2 2 P R O G R A M M I N G M A N U A L
C M 4 0 & C M 5 0
Zones / Channels (cont.)
3.
Click on the Name field to enter a Zone Name. Zone Names are limited to 11
characters.
Repeat the process for each Zone to be used.
4.
Set the check box in the Enabled? column for the Zones you want to use.
5.
Click the Channels tab.
Figure 20 – Configuring Channels
NOTE:
Zones will not appear until Channels are added.
6.
If you want to enable Multiple Zones, set the Enable Zones check box. Otherwise all
Channels will be listed and displayed in sequential order.
Adding an Analog Channel
To add an Analog Channel:
1.
Click the Zones/Channels button in the main window.
2.
Select the Channels tab and right-click in the window to bring up the Channels menu.
3.
Select Add Analog Channel on the popup menu. The Add Analog Channel dialog
displays.
Figure 21 – Adding Analog Channels
