GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./
Canada/Mexico-11349262) - 2018 - crc - 6/20/17
In Brief
9
Q
:
Press to lock all doors.
Lock and unlock feedback can be
personalized. See
.
b
:
Press twice to open or close
the liftgate. Press once to stop the
liftgate from moving.
c
:
Press twice to open the
liftglass.
7
:
Press and release to initiate
vehicle locate. The turn signal
lamps flash and the horn sounds
three times.
Press
7
and hold for more than
three seconds to sound the panic
alarm.
Press
7
again to cancel the panic
alarm.
See
or
and
Remote Keyless Entry (RKE)
System
Remote Vehicle Start
The engine can be started from
outside of the vehicle.
Starting the Vehicle
1. Press and release
Q
on the
RKE transmitter.
2. Immediately press and hold
/
for at least four seconds or until
the turn signal lamps flash.
Start the vehicle normally after
entering.
When the vehicle starts, the parking
lamps will turn on.
Remote start can be extended.
Canceling a Remote Start
To cancel a remote start, do one of
the following:
.
Press and hold
/
until the
parking lamps turn off.
.
Turn on the hazard warning
flashers.
.
Turn the vehicle on and then off.
See
Door Locks
To lock or unlock the doors from
inside the vehicle:
.
Press
Q
or
K
on a power door
lock switch.
.
Pushing down the manual lock
knob on the driver door will lock
all doors. Pushing down the lock
knob on a passenger door will
lock that door only.
.
Pulling the door handle once will
unlock that door. Pulling the
handle again will unlatch it.
To lock or unlock the doors from
outside the vehicle press
Q
or
K
on
the RKE transmitter.
See
or
(RKE) System Operation (Keyless
Access)
.