GMC GMT 610, Руководство пользователя

Страница: 15 / 80

G/H Van (GMT 610) 2005
G/H V
AN
(
GMT 610
)
11
P
AGE
(Section 6 — continued from previous page)
Systems include:
• Fuel system - Injection pump, injector lines and injectors, fuel return hoses and pipes, air cleaner, outside air hose, fuel pump, fuel
filter, fuel heater assembly and intake manifold.
• Exhaust system.
• Crankcase pressure regulation system.
External engine components such as air cleaner, crankcase pressure regulator valve, alternator, injection pipes, fuel return hoses from
injectors, exhaust manifolds, oil fill pipe, etc., must be provided with sufficient clearance for engine roll and torque.
When a vehicle is equipped with an electronic fuel injection (EFI) engine, it has an engine control module ECM/PCM/TCM or VCM.
This ECM/PCM/TCM or VCM must be maintained at a temperature below 185ºF at all times. This is essential if the vehicle is put
through a paint baking process. The ECM/PCM/TCM or VCM will become inoperative if its temperature exceeds 185ºF. Therefore, it is
recommended that temporary insulation be placed around the ECM/PCM/TCM or VCM during the time the vehicle is in a paint oven
or undergoing another high temperature process.
Note: To protect the under dash, seat locations for control modules must be protected from moisture/water when cleaning vehicle.
Section 7 — Transmission
This product is equipped with a neutral/park start safety switch mounted on the transmission which interfaces with the vehicle starter circuit.
The starter will only operate with the shift lever in the neutral or park position.
Models equipped with brake-transmission shift interlock (BTSI) require full application of the regular brakes before shifting from park when
the ignition key is in the run position.
Section 8 — Fuel and Exhaust
Fuel Systems
Due to the critical nature of sealing the fuel system, anyone making modifications or alterations to the existing system must assume
complete responsibility for the system reliability, performance and compliance to FMVSS 301 and emission standards.
(Section 8 — continued on next page)