GMC CHEVROLET Equinox 2021, Руководство пользователя, Страница: 34 / 369

Chevrolet Equinox Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
14420010) - 2021 - CRC - 11/10/20
Seats and Restraints 33
2. Move the seatback to the desired
position, and then release the lever to
lock the seatback in place.
3. Push and pull on the seatback to make
sure it is locked.
To return the seatback to the upright
position:
1. Lift the lever fully without applying
pressure to the seatback, and the
seatback will return to the upright
position.
2. Push and pull on the seatback to make
sure it is locked.
Power Reclining Seatbacks
To adjust a power seatback, if available:
. Tilt the top of the control rearward to
recline.
.
Tilt the top of the control forward to
raise.
Memory Seats
If equipped, memory seats allow two drivers
to save and recall their unique seat positions
for driving the vehicle, and a shared exit
position for getting out of the vehicle. Other
feature positions may also be saved, such as
power mirrors, if equipped. Memory
positions are linked to RKE transmitter 1 or 2
for automatic memory recalls.
Before saving, adjust all available memory
feature positions. Turn the vehicle on and
then press and release SET; a beep will
sound. Then immediately press and hold 1,
2, or
B
(Exit) until two beeps sound. To
manually recall these positions, press and
hold 1, 2, or
B
until the saved position is
reached. Follow the instructions under
“ Saving Memory Positions. ”
The vehicle identifies the current driver ’ s RKE
transmitter number (1 – 8). See Remote
Keyless Entry (RKE) System Operation 0 7 .
Only RKE transmitters 1 and 2 can be used
for automatic memory recalls. A Driver
Information Center (DIC) welcome message
indicating the transmitter number may
display for the first few ignition cycles
following a transmitter change. For Seat
Entry Memory to work properly, save the
positions to the memory button (1 or 2)
matching the RKE transmitter number
displayed in the DIC welcome message.
Carry the linked RKE transmitter when
entering the vehicle.
Vehicle Personalization Settings
. To begin the Seat Entry Memory
movement when the vehicle is started,
select the Settings menu, then Vehicle,