GMC CADILLAC USER EXPERIENCE, Системное руководство

Страница: 45 / 94

The Next Generation Cadillac User Experience (GMNA-Localizing-U.S./
Canada-12690022) - 2019 - CRC - 3/28/18
44 NAVIGATION
destinations list. Touch
z
on
the top right corner so the
system can recalculate the
route.
If there is only one address in
the destinations list, the
system will disable the move
and delete functions. The
system will not allow the
final destination to be
deleted.
Map Information
Road network attributes are contained
in the map database for map
information. Attributes include
information such as street names,
street addresses, and turn restrictions.
A detailed area includes all major
highways, service roads, and
residential roads. The detailed areas
include Places of Interest (POIs) such
as restaurants, airports, banks,
hospitals, police stations, gas stations,
tourist attractions, and historical
monuments.
If the vehicle does not have an
applicable service plan, the map
database may not include data for
newly constructed areas or map
database corrections that are
completed after production. The
navigation system provides full route
guidance in the detailed map areas.
Zoom Control
The zoom control display is shown on
the map view. A few ways to zoom in
or out are:
.
Touch + or – to zoom in or out on
the map.
.
Double tap with one finger to
zoom in or single tap with two
fingers to zoom out on the map.
.
Use the index finger and thumb to
zoom out by pinching and then
zoom in by spreading those two
fingers on the map.
Map Gestures and Map Scale
Use the following gestures on the
infotainment display to adjust the
map scale and display options.
.
Pinch to zoom in or out.
.
Pan the map.
.
Use two fingers to tilt down and
change from 2D to 3D. Tilt up to
change back to 2D.
.
Rotate the map.
See Using the System 0 8 .
Mute
When in active guidance, the audio
prompts while using navigation can be
muted. Touch the speaker icon on the
right side of the upper bar. A slash
will appear on the speaker to indicate
voice guidance is muted.
Active Guidance View
When a destination is chosen and a
navigation session is active, the
navigation system enters into an
Active Guidance View (AGV).
Map Orientation
Touch the Options icon on the map to
access map orientation settings. Map
orientation is 3D Heading Up by
default.