Customization Features
To customize features:
1. With the vehicle in Park, turn on the
ignition.
2. Press the
(Customization) button
to display available customization
features.
3. With the desired customization
feature displayed, press the
(Set/Reset) button to access the
feature settings.
4. Press the
button to scroll through
the available settings.
5. With the desired setting displayed,
press the
button to select it.
6. To exit the Feature Settings menu,
press the
button until EXIT
FEATURE SETTINGS is displayed
and then press
, or press the
button or the
button.
Customization features include:
• Display Language — Information can
be displayed in several languages
• Auto Door Lock — Automatically
locks the vehicle doors
• Auto Door Unlock — Automatically
unlocks the vehicle doors
• Remote Door Lock — Feedback from
Remote Keyless Entry locking
• Remote Door Unlock — Feedback
from Remote Keyless Entry unlocking
• Delay Door Lock — Delays locking
doors and liftgate after exiting
• Exit Lighting — Amount of time the
exterior lamps remain on after exiting
• Approach Lighting — Exterior lamps
turn on when using Remote Keyless
Entry
Getting to Know Your Tahoe/Yukon 2-Mode Hybrid
8
Driver Information Center
Your vehicle’s Driver Information Center
(DIC) provides vehicle information,
vehicle warning messages and vehicle
feature customization. The DIC mes-
sages will be shown on your instrument
panel cluster display. To operate the DIC,
the ignition switch must be on.
DIC Buttons
The following
DIC buttons are
located on the
right side of the
instrument
panel cluster:
(Trip/Fuel):
Press this but-
ton to display
the compass, outside temperature,
odometer, trip odometer, fuel range,
average economy, fuel used, timer, trans-
mission temperature, instantaneous
economy, Active Fuel Management™
and battery voltage.
(Vehicle Information):
Press this
button to display the oil life, English/
Metric units, tire pressures, engine hours
and Remote Keyless Entry programming.
(Customization):
Press this button to
customize certain vehicle features to your
preference.
(Set/Reset):
Press this button to set
or reset certain vehicle functions as well
as acknowledge DIC messages.