Getting to Know Your
Canyon
14
Dome Lamp Override
To prevent your vehicle’s dome lamps
from illuminating when a door is opened,
press the dome lamp override button
located below the exterior lamps knob.
See Section 3 of your Owner Manual.
Rear Seat Folding Operation
(if equipped)
Fold down the forward-facing rear
seat on Extended Cab models
• Pull down on the bottom of the seat
until it is in place. (Note: The rear
seat storage compartments must be
in the rearward position before folding
the seat down.)
Store the seat
• Push the entire seat up until it is flush
with the trim panel.
Note:
To ensure that the hinges or
latches do not damage the safety belt or
cause the belt buckle to rattle, fold and
store the belt between the seat cushion
and seatback using the Velcro attach-
ments provided on the lower portion of
the seat.
The fog lamps are canceled each time
the ignition is turned off and, when
needed, must be turned on manually
after restarting the vehicle.
See Section 3 of your Owner Manual.
Cargo Lamps
The cargo lamps provide illumination of
the cargo area and the interiors of the
top-box storage units. The controls are
located near the exterior lamps control.
Turn on the cargo lamps
• Press the button once.
The button’s indicator light will glow
when the lamps are on.
See Section 3 of your Owner Manual.
Note:
To turn your cargo lamps on, the
dome lamp override must not be activat-
ed, and the dome lamps must be on.
Canyon 07 A 4/26/06 9:02 AM Page 14