GMC 2001 Yukon XL, Руководство пользователя

Страница: 23 / 419

1-10
On Suburban/Yukon XL models with 60/40 split bench
seats, before folding the rear seat on the driver’s side,
insert the two buckles into the retainer in the seatback.
That way, the buckles will be out of the way when the
seat is folded and will be available for passengers to use
when the seat is returned to the passenger position.
Also, make sure that nothing is under or in front of the
seat and that the head restraints are completely lowered.
To fold, pull up on the
strap loop at the rear of
the seat cushion. Then,
pull the seat cushion up
and fold it forward.
After folding the seat cushion fully forward, pull the
seatback forward and fold the seatback down until it is flat.
If the seatback cannot fold flat because it interferes with
the cushion, try moving the front seat forward and/or
bringing the front seatback more upright. On the passenger
side of Suburban/Yukon XL models, the lever at the base
of the seat must be turned rearward to release the seatback.
To create a load floor, release the panels from the
seatback by pushing forward on the latch. Then fold
the panels back to cover the rear seat footwell area.
To return the seat to the passenger position on a
Suburban/Yukon XL, lift the floor load panels and latch
them into the seatback. Lift the seatback up and push
rearward all the way. Then lower the seat cushion until it
latches into position.
Pull forward on the seatback and up on the seat cushion
to make sure the seat is securely in place.