GM International 2003 Cadillac DeVille, Руководство пользователя

Страница: 308 / 423

Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will
be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that has
sufficient protection against freezing.
Adding Washer Fluid
The CHECK WASHER FLUID message will be
displayed on the Driver Information Center (DIC) when
the fluid is low.
The windshield washer
fluid reservoir is located in
front of the underhood
fuse block on the
passenger’s side of the
vehicle.
See
Engine Compartment Overview on page 5-12 for
reservoir location.
Open the cap with the washer symbol on it. Add washer
fluid until the tank is full.
Notice:
•
When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
•
Don’t mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water doesn’t
clean as well as washer fluid.
•
Fill your washer fluid tank only three-quarters
full when it’s very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
•
Don’t use engine coolant (antifreeze) in your
windshield washer. It can damage your
washer system and paint.
5-37