6
1.3.2 Introduction for Back Side of the VSP-F2L4 Controller
(6) DMX512 signal input port.
(7) Adjust video synchronous In/Out port
(8) Lan-100M is the network communication port that is used to communicate with
the control software on computer to set the LED panel parameters.
(9) HDMI video signal input port.
(10) SDI1 /SDI2 is the SDI video signal input port which is support to the input of
HD SDI signal and 3G SDI signal.
(11) DVI IN is the DVI video signal input port and DVI OUT is the DVI video signal
output port.
(12) OUT1~OUT4 port is four serial network signal output ports of the controller
(13) OUT1~OUT2 port is two serial optical fiber signal output ports of the controller;
(14) Power port is the power input port and the power switch port. AC110~220V
