17
remember to save your settings in the “Parameters” interface when you finish setting
all LED screens addresses. Otherwise, once you reboot the controller, the data for the
address setting will be lost.
Attention Please
：
Single setting will usually only be used for some special
requirements of display. Generally, Multiple Settings (whole screen settings) and
Intelligent Settings would be recommended as they are bring greater ease of use for
users to set the LED screen address. Shown below are the applications of these two
methods.
3.4.2 The Method 2 for Address Setting: Multiple Setting (whole
screen setting
）
Function:
Under the circumstance that there is no signal divider in the control system
and the signal port of the controller is connected with the LED screen directly, users
can set all LED screen address at one-time.
