3
(1)Don't plug or unplug when it works with charged, make sure the voltage of inputs and outputs are normally
before use .
(2)The maximum output of each phase no more than 32A in all, and one port’s output can not be higher than 16A
output of one output port can not be higher than 16A.
(3)Balance the three phase power as possible when you use it .
Power Connection:
(1)Usually,one power cable is connected to one row or one column LED panels, LED panel can be cascade
connected one by one .
(2)PDV09 use five-cores power cable AC 380V 32A for input
(
included three Live lines ,one Neutral line and one
Earth line),it can be cascaded to next one.
(3)The maximum output is AC 220V 16A each output port which from PDV to LED screen,but we suggest its
power load not much than AC 220V 10A.
(4)Balance the three phases power supply for the LED screen as possible when it working.
Point Out :
As experience before,the single power screens,such as IDsn
，
ODsn and so on,
each power
cable connected no more than 15 LED panels;and,the dual power LED panel,such as BAtn10, each power cable
connected no more than 8 LED panels.
7
Attention
8
Safety Summary
Read the following safety precautions carefully to avoid injury and prevent damage to this product or any
products connected to this product. To avoid potential hazards, use this product in accordance with regulations.
Only qualified personnel can perform service procedures.
1. avoid fire or personal injury.
use the appropriate power line. Please only use the dedicated power cord for this product , which acquire
the international / regional certification.
Connect and Disconnect Properly. When add Connection and removal of all connection operation, make
sure no contact with the voltage source.
2. Make the product grounded.
The product is grounded through the grounding conductor of power line in order to avoid electric shock, the
grounding conductor must be connected to the earth well. Before the power input or power output of this product,
make sure it is correctly grounded.
3.comply with all terminal ratings.
To avoid fire or electric shock, observe all ratings and markings on the product, before make connections to
the product, read the manual for further ratings information. The voltage applied to any terminal and the power
requirements do not exceed the maximum rating of the terminal.
4 .Do not operate without covers. Do not open the housing or panel when using the product.
