Analogue radio-controlled watch with LCD
Characteristics:
Liquid crystal display: date and month or seconds and day of week or time zone
Analogue display: hours and minutes
Time and date can be adjusted manually
Up to 24 different time zones can be set
Automatic switch between summer and winter time for the corresponding time zone
Time is calibrated up to 3 times a day using radio signals
End of battery life display
Operation:
Please use a sharp object to operate the buttons (S1 and S2).
Setting the time zone:
Press and hold down S2 for 2 seconds. The time zone flashes in the display. Press S1 to select
the time zone, e.g. select “0H” for Europe.
The time zones are displayed in the following order:
1H
2H
03H
04H
05H
06H
07H
08H
09H
10H
11H
12H
–12H
-11H
-10H
-09H
-08H
-07H
-06H
-05H
–04H
-03H
-02H
–01H
0H
Note:
2H = the time is advanced by two hours.
-2H = the time is put back by two hours.
Automatic summer/winter changeover
The watch adjusts summer/winter time according to the time signal
A “*” in the display indicates that summer time is active.
Reset:
Press S2 for 5 seconds. “00:00” flashes in the display. The hour and minute hands move to the 12
o’clock position.
If the hands do not remain in the 12 o’clock position, this must be corrected manually.
Briefly press S1 to gradually move the minute hand in a clockwise direction.
If you press S1 for 2 seconds, the minute hand automatically moves and if you press S1 again, the
hand stops moving.
Summer/winter time
indicator
End of battery life display
Reception symbol
Reception quality
S1
S2
