www.glp.de
Installation
16
Fusion XPAR 12Z Quick Start and Safety Manual Rev. A
Installing on a rigging truss or similar structure
You can suspend an XPAR 12Z fixture from a rigging truss or pipe using a suitable clamp
attached to the integral mounting bracket of the XPAR 12Z.
If you are going to install the fixture hanging vertically downwards from a horizontal rigging
truss or pipe, you can fasten it to the truss using a G-clamp. If you are going to install the
fixture in any other orientation, you must use a half-coupler clamp that completely
surrounds the truss chord or pipe.
Figure 4. Truss mounting
1. Attach a suitable clamp to the mounting bracket of the XPAR 12Z as shown in Figure 4.
2. Attach the clamp to the truss or structure.
3. Secure the fixture with a safety cable as described in ‘Securing fixtures with a safety
