GLP Fusion MBL20, Руководство пользователя

Страница: 26 / 38

www.glp.de Control menu layout
26 Fusion MBL20 User Manual Rev. A
10. Control menu layout
Menus Notes
DMX ADDR 1 - 512 Enter DMX address
STANDARD – 2
DMX MODE
ADVANCED – 5
Select DMX control mode
CCT 2700K – 6500K in 100K steps
Set Color Temp for rotary
knob “Manual” position
MANUAL
BRI 000%-100% in 1% steps
Set Brightness / Dimmer for
rotary knob “Manual”
position
DIMCURVE
LINEAR, THEATER, SQUARE,
SQINVERS
Set dimmer curve
DIMSPEED FAST , SMOOTH Set dimming speed
PWM
10KHz, 12KHz , 16KHz, 18KHz,
24KHz, 30KHz
Set LED refresh rate
NO DMX BLACKOUT, HOLD , MANUAL
Set operation when DMX is
lost
SCRNTIME 01 MIN, 05 MIN, 10 MIN, OFF
Set time for screen to turn
off
SCRNFLASH ON, OFF
Set screen to flash when
no DMX is present
SETTINGS
SCRNLOCK 01 MIN, 05 MIN, 10 MIN, OFF Set time for screen to lock
TIME CUR 00:00 (hh:mm)
Shows how long unit has
been powered for this
session
TIME TOT 000000 (hours) Shows total run time of unit
TEMP LED 000 C Shows LED temperature
FIRMWARE v1000 Firmware version
SERIAL 00001 Unit serial number
INFO
RDM UID A0BC31 (example)
Last digits of unique
identifier in hexadecimal
TEST RUN
Press Enter to start test,
Menu or Enter to stop
DEFAULT LOAD
Press Enter to load default
settings, except DMX
Address and DMX Mode
SERVICE
CALIBRAT See table below
Adjust the warm
white/cool white settings
for CCT values. You must
hold Enter for 5 seconds to
enter this menu.
Default settings are written in BOLD type.