manualshive.com logo in svg

Glow-worm Miami GF, Инструкция по использованию, установке и обслуживанию, Страница: 1 / 16

Поделиться
Скачать
Glow-worm Miami GF Скачать руководство пользователя страница 1

Hepworth Heating Ltd.,

Nottingham Road, Belper, Derbyshire. DE56 1JT

General/Sales enquiries:

Tel: (01773) 824141  Fax: (01773) 820569

One Contact Local Service

Customer Services:

Tel: (01773) 828100

Fax: (01773) 828070

221917C.06.02

All replacement parts

All labour charges

All call-out charges

Guarantee Registration

Miami GF

Radiant Convector Gas Fire

This is a Cat I

2H

 Appliance

Reference in these instructions to British Standards and Statutory

Regulations/Requirements apply only to the United Kingdom.

For Ireland the rules in force must be used.

The instructions consist of three parts, User, Installation and Servicing Instructions, which includes the Guarantee Registration

Card.  The instructions are an integral part of the appliance and must, to comply with the current issue of the Gas Safety

(Installation and Use) Regulations, be handed to the user on completion of the installation.

T o  b e   l e f t   w i t h   t h e   u s e r

❏

✔

❏

✔

❏

✔

Instructions for Use

Installation and Servicing

G.C. No. 32- 047- 05

REGISTER YOUR GLOW-WORM APPLIANCE

FOR 1ST YEAR GUARANTEE PROTECTION

CALL 0208 247 9857

Thank you for installing a new Glow-worm appliance in your home.

Glow-worm appliances' are manufactured to the very highest standard so we are pleased to offer our customers'

a Comprehensive First Year Guarantee.

In the center pages are to be found your Guarantee Registration Card, which we recommend you complete and

return as soon as possible.

If this card is missing you can obtain a copy or record your registration by telephoning the Heatcall Customer

Service number 01773 828100.

Our Guarantee gives you peace of mind plus valuable protection against breakdown by covering the cost of:

9418

Содержание Miami GF

















Отзывы:

Нет отзывов