Globus RF CLINIC PRO, Руководство пользователя

Страница: 11 / 20

11
Rev.12.18 of 12.12.18
WARNINGS AND CONTRAINDICATIONS
Mandatory behavior
For maximum safety, the device must be used respecting the rules and the
limitations indicated by the user manual.
The manufacturer declines any responsibility due to a different use from what it is
indicated in this manual.
No part of this manual (texts and/or photos) may be reproduced by electronic or
mechanical means without the prior written authorization of the manufacturer.
If the package, the cable or the connector of the power supply show signs of
wear or damage, replace it instantly.
The device should be connected to the mains by its power supply. Before starting
the treatment, make sure that the power system specifications comply with the
directives in force in your country. Make sure that the power supply will be easily
unplugged.
Do not modify the device.
Warnings before the use
DANGER OF BURNS: an improper use of the system may cause scalds or burns to
the treated subject.
Do not use Rf Beauty 6000 Med simultaneously with other electronic devices,
especially if they maintain vital functions. Read the tables at the end of the
present manual for a correct use of Rf Beauty 6000 Med. If you have to use the
device near or upon other devices, pay attention to how it is working.
It is recommended to read carefully the entire operating manual before using the
device; keep this manual carefully.
Checking the integrity of the device before each use is a fundamental
requirement to perform the therapy. Do not use the unit if the cables or the buttons
are defective or malfunctioning.
Do not use flammable materials while using the device.
The device should be kept out of the reach of children.
During the treatment, remove metal objects e.g. bracelets, necklaces, piercings,
etc.
Before starting the treatment, make sure that the skin of the patient is clean and
dry.
Warnings during the use
While using the device, make sure that handpieces are well covered with
conductive cream and that their surface is completely kept in contact with the
skin of the patient.
Adjust the emission power according to the individual tolerance to heat.
Do not let the handpiece stay still during the emission, as it may cause burns.