18
4.
The computer opens the “Add a device” dialog box and searches
for nearby Bluetooth devices.
5.
Your Mini will be displayed as MiniDisc_xxxx where xxxx is the 4
last digits of the Mini serial number sticker. Select this device and
press next.
6.
Enter
1234
as the PIN. Press and hold the blue center button on
the Mini until the LED lights flash red and then press “Ok” on the
PC.
7.
The computer will indicate that the pairing is successful and load
the driver needed for the Mini. Loading the driver may take
several minutes.
8.
To connect to the Mini, right click on the Bluetooth icon
in the GlobiLab status bar, located at the bottom right corner of
the screen and select the device you want from the pop-up menu
listing the paired devices. When connected, the Bluetooth icon
will turn blue and a notice in the lower left hand corner of the
screen will indicate that you are connected to MiniDisc_xxxx.
3.2.3 Pairing the Mini with a Mac OS
1.
Open the Bluetooth menu from the Mac menu bar and select “Set
up Bluetooth Device.”
2.
Your Mini will be displayed as MiniDisc_xxxx in the dialog box that
opens. xxxx is the last four digits of the Mini serial number.
3.
In the next dialog box, press “Passcode Options” and select “Use a
Specific Passcode.” Enter
1234
as the passcode.
4.
Press and hold the blue center button on the Mini until the LED
lights flash red. Press “Ok” and “Continue” on the Mac computer.
5.
When the wizard action is complete, the computer will confirm
that the Mini has successfully been paired to the Mac.
