GlobalTime NTP Products
23
In
NTP
status,
there
are
STRATUM
(server
layer),
ROOTDELAY
(delay),
ROOTDISPERSION (precision).
GPS status
In GPS status, there are LATITUDE, LONGTITUDE and SATELLITE UMBER.
Note: The items above require filling in the right IP, otherwise it will result in the checkout
failure and will not be saved. If you enter the IP address and can not access the
management interface, you need to check the network status to make sure that power is on
and the network port is connected to the management port.
3.7
Client configuration
Regarding WinXP/2003 system, it includes NTP services and can be directly set. The
specific setting methods are as follows:
Firstly, double click the time mark on the right side of the windows task bar and it will pop up
an interface with date and time properties. Then select the Internet time screen, which is
shown as the picture in the next page.
Secondly, modify the windows default time server, such as modifying to 192.168.2.8.
Thirdly, click "Apply", and then "Update Now". After a successful synchronization, it will show
successful ****** synchronization time in **year, **hour, **minute. The next synchronization:
**year, **mounth **Date, **hour, **minute. Windows default is to synchronize once a week. If
the screen displays RPC not available, you should open the Control Panel, select
Administrative Tools / Services, search windows Time from the services list, choose to
automatically open the service and restart it.
