Page 22
SmartOne C User Manual
Confidential & Proprietary Information
9100-0410-01 R2.4
INPUT SETTINGS TABS
The Input Settings Tab allows a user to select either a Status Changed Message or an Undesired State
Message for each SmartOne Input. The program will not allow a user to select both types for each Input.
• Status Changed Message -
The SmartOne has two inputs that can be configured to send a Status
Changed Message once the selected input Opens, Closes, or Both. The Message sent can either contain
or not contain the GPS coordinates of the device at the time the status of the input(s) changed.
• Undesired State Message -
The SmartOne can be configured to send messages throughout the time
the input is in the undesired state, either to the Open or Closed position. The message interval while the
input is active can be configured in Days, Hours, and Minutes. Once the input exits the Undesired State,
the SmartOne will return to the message interval or Time (s) of Day for Location Messages.
• Accumulate/Count Message -
The SmartOne can accumulate hours or count events based on the state
of the inputs.
• Message Interval –
If a Status Changed Message or an Undesired State Message was selected for either
Input, the following message will be displayed:
If Time(s) of Day Messaging was selected, user must specify the times in the Location Message Tab (refer to
Time(s) of Day Messaging on Page 18).
