Installation Guide for MRI-1000
GS-08-1724, v 3.2
4
Installation
The MRI-1000 comes as a ready to mount assembly. The Outdoor Unit and 30’ft cable
are affixed to the mounting bracket. Each Unit has been fully tested at the factory prior to
shipping for deployment. The entire assembly mounts to the pole with two 4.5 inch lag
bolts. The Cable will run down the pole thru ½ inch EMT Conduit. And terminate in a
metal enclosure where the Junction Box is mounted along with the kV2c meter. ½ Liquid
tight with appropriate connectors is recommended to connect between the end of the
conduit on the pole to the Customer Enclosure Box which houses the Meter. The conduit,
conduit clamps and interface to the customer enclosure are to be provided by the user.
