GlobalSCAPE DMZ Gateway v3.1, Руководство пользователя

Страница: 22 / 60

DMZ Gateway User Guide
22
Ubuntu Linux
After creation of the /etc/init.d/dmzgatewayd symbolic link, the update-rc.d command can be used to
register and deregister the script for system startup/shutdown.
To register the script

The following command may be used as root:
update-rc.d dmzgatewayd defaults
To deregister the script

The /etc/init.d/dmzgatewayd symbol link must first be removed using the following command as
root:
rm /etc/init.d/dmzgatewayd
To deregister the daemon

The following command may be used as root:
update-rc.d dmzgatewayd remove
Solaris
On Solaris, after creation of the /etc/init.d/dmzgatewayd symbolic link you typically manually create the
appropriate symbolic links in the /etc/rc* directories.
To register the script

The following commands may be used as root:
ln -sf /etc/init.d/dmzgatewayd /etc/rc0.d/K99dmzgatewayd
ln -sf /etc/init.d/dmzgatewayd /etc/rc1.d/K99dmzgatewayd
ln -sf /etc/init.d/dmzgatewayd /etc/rc2.d/S99dmzgatewayd
ln -sf /etc/init.d/dmzgatewayd /etc/rc3.d/S99dmzgatewayd
To deregister the script

Remove the symbolic links as root:
rm /etc/rc0.d/K99dmzgatewayd
rm /etc/rc1.d/K99dmzgatewayd
rm /etc/rc2.d/S99dmzgatewayd
rm /etc/rc3.d/S99dmzgatewayd
Upgrading or Repairing DMZ Gateway
Upgrades from version 2.x to version 3 of the DMZ Gateway are supported on Windows systems only.
To upgrade or repair DMZ Gateway on non-Windows systems

Perform the standard installation process for the target operating system and use the same
settings for installation path and configuration path. If the DMZ Gateway Server daemon service
is running, you are prompted to stop it; if you do not stop it, the installer will abort.
To upgrade from DMZ Gateway 2.x on Windows systems
1. Close the Administration interface.
2. As a precaution, back up the existing installation directories and any other files you may have
installed elsewhere.