4K Video Conference Camera User Manual
11
Method 2: Open “upgrade_En.exe”, change IP
and click “Set”. After modified, the video
conference camera will be restart.
Change IP address:
Step 1
Search the IP address of camera.
Step 2
Select the camera IP of you want to
change.
Step 3
Select the config dialog of upgrade
applets.
Step 4
Change the IP address, netmask and
gateway, then click “Set”.
Step 5
Finish.
6.4.2 Visit/Access Camera
Input http://192.168.100.88 to IE (better with IE
web browser, others will cause little latency), a
login window pop up, input username: admin,
password: admin, shown as below:
After login, shown as below:
IE browser does not support H5, you need to
use VLC plug-in to view videos. Please visit
VLC website (http://www.videolan.org/vlc)
download and install the 32-bit VLC media
player, after it installed, visit video conference
camera will have normal image display. Other
mainstream browsers already support H5 and
do not need to install the VLC plug-in.
6.5 Camera Controlled by WAN
6.5.1 Setup IP Controlled by Dynamic DNS
Two dynamic DNS: Dyndns.org, 3322.org.
Router Port Mapping:
Take Tenda router for example, enter the
Router Home Page (interface page), select
“Advanced”- “Virtual Server”, add a new port
number in “Ext Port”, add a new port number in
“Int port”, put camera IP address to “Internal
IP”, then select “Save”, shown as below: