CHAPTER 6 – SERVICE
Pedal Assembly
The pedal assembly installs as one unit. To remove the pedal assembly you will need to unplug the pedal cable
assembly from the wire harness from the backside of the cabinet, as shown by the arrow in the picture below.
Then remove the (4x) 1/4-20H Security Torx bolts as shown by the arrows. Pull the pedal assembly towards the
seat to remove.
Figure 57
– Pedal Removal (Standard Cabinet)
AC Power Panel
The AC power panel distributes power to the inside of the cabinet, and provides ports for the Ethernet and
phone connections from the computer. Inside the cabinet is a 6-outlet AC power strip that is connected to the
power panel. An AC EMI Filter removes the electrical noise or dirty power that can cause electrical interference
with the hardware inside the cabinet.
Figure 58
– Power Panel Front and Back
Need For Speed™ GT
System Documentation
49
040-1201-01 Rev. C 5/28/2004
