CHAPTER 4 – GAME SETUP
Controls Menu
Figure 34
– Testing Game Controls
The Controls Menu allows the operator to test the cabinet controls. The Controls Menu is a graphical
representation of all the controls on the cabinet. If you press a button, move the steering wheel, step on the
gas, or move the shifter, you should see the same action or movement on screen. To exit from this menu, press
the
Start
and
View
button at the same time (or press the Operator button).
•
Buttons.
When any button is pressed, it will light up on screen.
•
Steering Wheel.
Turn the Steering Wheel to the left or right. When it is working properly, you should see
a change in the numerical reading just above the center of the steering wheel.
•
Gas & Brake Pedal.
When you step on the pedals you will see the same action on screen. The numerical
readings show the high, low, and current values.
•
Shifter.
Moving the shifter up or down will appear on the screen. If you press the E-Brake button, it will
light up on screen.
•
Credits.
When you insert money or credit into the coin mech or bill validator, you will see CREDITS OK on
screen.
•
Calibration.
You can calibrate the steering wheel and pedals at any time by pressing the
Start
and
Horn
buttons simultaneously. DO NOT touch the steering wheel during the calibration process as this is done
automatically with the Force Feedback motor. You will need to step on the gas and brake pedals when the
calibration process asks you on screen.
•
Force Feedback Test.
Validates that the Force Feedback motor and Immersion Controller cards are
working properly. Press the
View
and
Horn
buttons simultaneously to start the test. If everything is
working properly, the steering wheel should move to the left and right momentarily.
•
Start Button, Leader Light and Brake Light.
When you enter the Controls Menu, the
Start
button,
Leader Light
and
Brake Lights
on the cabinet will begin to blink. If you do not see these lights blinking,
verify the bulb for that light is in working condition.
28
GLOBAL
VR
040-1201-01 Rev. C 5/28/2004
