bluetooth Car Charger BC56 Manual
Thank you for purchasing our bluetooth car
charger! In order to have a best performance
experience, please read the manual carefully before
use!
I. Product introduction
This product is a car-specific car bluetooth
player, built-in advanced bluetooth and WMA.MP3,
WAV, FLAC decoder chip, can play music files inside
U disk, wirelessly transmitted to car audio, no need to
modify your car can easily Make your music enjoy
while driving. More important is the purity and clarity
of the special sound of DSP technology. We hope to
bring you unlimited enjoyment of the music.
II. Schematic Appearance
Description
：
1. MIC
2. LED display window
3. Short press : Previous song/ long press to
enter FM mode
4. Long press 2s to shut down/ short press for
mode switch
5. Short press: Next song/ long press to enter
FM mode
6. Play/pause/answer/redail/long press to
activiate the SIRI assistant
7. Adhensive zone
8. TF card slot
9. USB jack
10. 2.4A output
11. QC3.0 output
12. Cigar connector
13. Adhensive pad
III. Features
1. Support all types of vehicles
2. LED display
3. Support QC3.0 fast charge output
4. Support QC3.0 protocol /USB Power Delivery
QC 3.0 protocol /Quick Charge 3.0/2.0 protocol
/Huawei FCP/SCP protocol / Samsung AFC
protocol /USB BC1.2 DCP /Support Apple 2.4A
charging specification
5. Support stereo FM transmission technology
6. Support TF card music player
7. Support WMA, MP3, WAV, FLAC music
format files
8. Automatic power off memory function
9. bluetooth supports A2DP, AVRCP, HFP, HSP
10. bluetooth V5.0
11. bluetooth hands-free calling
12. Support DSP technology
13. Battery voltage detection
14. Short press any key to light up after the fake
power off
VI. Operation instructions
4.1.1 Insert the machine into the cigarette lighter
of the car. After power supply, the product will
automatically enter the power-on state. LED display:
HI---battery voltage---bluetooth--FM frequency.
4.1.2 Turn on your car FM radio, and adjust the
frequency of product same as your car radio, then
your can enjoy music from your car stereo.
4.1.3 Adjust the FM frequency:
Long press the
/
button to enter the FM state.
When the LED display frequency flashes, long press
to fast adjust FM; short press for slow frequency
modulation from 87.5~108MHZ . Three seconds do
not operate to exit the frequency selection.
1. Please open bluetooth on your mobile phone and
search for the device “BC56” from phone menu list.
2. Choose the device “BC56”
3. Choose “BC56” in menu of phone and select the
connection as "hands-free device" in the authorized
device.
Matching connection for additional devices
At boot time, the bluetooth car hands free will only
automatically start connecting to the matching device
that was connected last time.
Note: Some phones can be automatically connected
when the bluetooth car is powered on again. Some
phones may need to grant permission for each
connection. You can set it to “Automatically connect."
For more information, please refer to the phone's user
manual.
4.2 Use bluetooth hands-free calling
(When your bluetooth hands free is idle or playing
music)
4.2.1 Dial number
In the connected state, the phone number is directly
dialed out by the mobile phone, and the sound is
automatically sent from the car audio speaker.
4.2.2 Answer the phone
In the connected state, when a call is made, press "
"directly to answer the call. In the answering
state, press the button
or the button
to switch
between bluetooth and the hands-free phone. Press
the “
” button again to hang up the phone.
