Page | 8
TROUBLESHOOTING GUIDE
Before any troubleshooting commences make sure the battery has a full charge!
(1)
Does the lift raise or lower
NO
(a)
Check the battery connection and reconnect
(b)
Check hand controls, make sure they are connected properly
(c)
Check for any lose wires on the control compartment
(d)
Check the connection cable for damage
(e)
Check to see that the lock on the hand control is in the unlocked
position.
(2)
The batteries will not charge?
Yes
(a)
Battery not inserted adequately, re-insert battery and check position
(b)
Check the Display light – Along with the main cable for good contact.
(c)
Check the main cable for damage.
(d)
Subsequent charging can be restarted by briefly disconnecting the main
supply or the battery.
