4/2007
3.1 CRITERIA FOR MAINTENANCE
The Instruction Handbook has a number of operations to be carried out by the Customer for a minimum of
basic maintenance, and other operations not always within his capacity.
For this reason the Service Centre should undertake to keep the machine in perfect working order in two
ways:
a)
Tuning the machine whenever possible.
b)
Proposing a regular maintenance programme to the Customer to be carried out at prearranged intervals
(for example, at the end of the summer or prior to a long period of inactivity).
a) Occasional tuning
– Check working order of safety devices and renew illegible or missing labels
– Check type pressures
– Clean air filter
– Check engine oil level
– Check for fuel leaks
– Align cutting deck
– Sharpen and balance the blades and check the condition of the hubs
– Check for wear in the belts
– Check the blade brake engagement
– Grease front wheels lever joint pins and bushes
– Check tightness of engine screws
– Check all those items indicated in the engine manual
b) Regular maintenance
– All work carried out in section a), plus:
– Check battery charge
– Check tension of belts
– Adjust drive engagement
(
➤
mechanical drive models)
– Adjust brake
– Adjust blade engagement
– Adjust blades brake
– Check steering allowance
– Check front bearings
– General lubrication
– Clean away grass cuttings and wash exterior
– Clean and wash inside cutting deck and collector channel
– Clean and wash grass-catcher
– Touching up of any damaged paint
© by GLOBAL GARDEN PRODUCTS
N...92
WORKSHOP MANUAL
CRITERIA FOR MAINTENANCE
3.1
0
1 / 1
page
from
2007
to
••••
<= ...BACK... <=
Содержание N 92 Hydro Series
Страница 1: ......
