Global Fire Equipment //
globalfire.pt
ma_chmcomm_01_010001_en_191121
CHAMELEON REPEATER with double RS422 interface
The repeater connections to the RS422 Interface are the same as for the Panel.
On the CHAMELEON REP, the flat cable interface connections are different from the GEKKO, as shown below.
GEKKO connections are made on the front of PCB and on CHAMELEON REPEATER are made on the back of PCB.
Please note that the Repeater does not have a loop card.
NOTE:
Make all connections with the power turned off to avoid risk of permanent damage
to the circuit boards.
15
