background image

ASSEMBLY INSTRUCTION

Glitzhome, LLC

SOLAR MOSQUITO CATCHER LIGHT

HOW THE SOLAR LIGHT WORKS:

 

During the day, the solar panel converts solar power into energy and stores it in the rechargeable battery. At night, the light 

turns on automatically and using the energy stored. The duration of the illumination will depend on your geographical 

location, weather conditions and seasonal light availability.

WORKING PRINCIPLE:

According to the biological nature of pest on light, wave, color attraction, we design the special light source which wave 

length is 365nm-600nm. it trap the fly insect by wave in long distance, and trap by light in short distance then kill them by 

high-voltage electrocuted networks outside around which is safe to human being as it has small current.

CHOOSE AN IDEAL LOCATION: 

Choose an outdoor location where the solar panel can receive at least 6 hours of full and direct sunlight each day. Shaded 

locations will reduce the battery charge and shorten the illumination time at night. Avoid placing solar lights near bright light 

sources, such as street lights. The bright light sources may cause the solar light to turn off automatically. Solar lights are 

ideal for night time lighting in the garden, lawn, etc. You can also place the solar lights outdoor during the day and then place 

them indoor for lighting.

ATTENTION FOR FIRST TIME USE:

Turn the TRAP/OFF/LIGHT switch to "TRAP/LIGHT" position, the light sensor will control the lighting automatically. When 

the environment turns dark, the solar light will turn on and use the energy stored in the battery. This light has two light 

modes, you can switch to "TRAP" to activate purple light, or switch to "LIGHT" position to activate white light. If you press 

the switch to "OFF" the solar light will turn off to save energy. If the solar light does not turn on automatically at night after 

6 hours of charging during the day, please check the following:

1. Make sure the power switch is at the "TRAP/LIGHT" position 

2. Check the battery and make sure the battery contacts the terminals securely. 

3. Make sure the solar light is located in a sunny location and the solar panel can receive direct sunlight. 

PRECAUTIONS:

1. Please note the solar light is designed to work when the environment gets dark. If there are strong light sources nearby, 

the solar light may illuminate dimly or not light up at all. 

2. Although the battery has been charged by the manufacturer, the electric charge may have dropped by the time consumer 

receives the product. Please let the solar light charge for a full day for the maximum performance. 

3. Surface of the solar panel must be kept clean. Dusty surface will reduce charging efficiency.

IMPORTANT: DOUBLE CHECK CONTENTS BEFORE DISCARDING THE PACKAGING TO

PREVENT LOSING PARTS THAT ARE NEEDED FOR ASSEMBLY

TRAP OFF LIGHT

Отзывы: