G+ Stand Alone Receiver
Handset Pairing
www.gliderol.com.au
The following instructions demonstrate how to pair your G+ Stand Alone Receiver to your Gliderol
handset. Please note, your unit will need to be installed by a qualified electrician or garage door
technician prior to pairing - refer to second page for wiring detail.
Step 1:
Press the red pairing button located on the side of the unit once to enable pairing, then press the
desired button or your remote to operate your door/gate.
PAIRING
BUTTON
Your remote is now
programmed & ready to use!
Should you require further assistance, please contact your local Gliderol office on 1300 799 177.
