SMA5005 & SMA5015 MANUAL
MANUAL # 5005-2040-000-F UPDATED: 6/1/2021
Declaration of Incorporation Motion Control Systems
EUROPEAN UNION
DECLARATION OF INCORPORATION
MOTION CONTROL SYSTEMS
Classified as Components of Machinery
Model Series SMA5005 & SMA5015
Council Directive
89/392/EEC
Machinery Directive
The Products cited below and their accessories comply with the following Safety of Machinery Standards when installed and operated in accordance with the
Instructions provided in the Operation & Installation Manuals. The products are declared to comply by virtue of Design Third Party Evaluations and Testing.
EMC Testing and Product Safety Evaluations and Risk Assessments were conducted by Intertek ETL SEMKO, an independent Nationally Recognized Test
Laboratory, located in Laguna Niguel, CA 92677, USA.
As components of Machinery, please be advised that:
1.
These are not individually classified as machinery within the scope of directive 89/392/EEC.
2.
These are intended to be incorporated into machinery or to be assembled with other machinery to constitute machinery
covered by directive 89/392/EEC, as amended.
3.
As such, do therefore not in every respect comply with the provisions of directive 89/392/EEC.
SAFETY STANDARDS
EN60204-1 (IEC204-1)
Electrical Equipment of Industrial Machines
Collateral Test Standards, Specified by EN60204-1
EN61000-6-4:2001
EMC – Emission standard for industrial environments
EN61000-6-2:2001
EMC – Immunity for industrial environments
Collateral Test Standards, Specified by EN61000-6-2
The undersigned hereby declares that the equipment specified above conforms to the noted Directives and Standards.
MANUFACTURER
________________________________
HELEN M. VASAK
SECRETARY-TREASURER
6-1-2021
Prepared By:
Intertek Testing Services, Laguna Niguel, CA
Confirmed By:
John Quigley, Quality Manager
Manufacturers Name:
GLENTEK INC.
Manufacturers Address:
208 Standard Street
El Segundo, CA 90245, USA
Description of Equipment:
Motion Control Systems including Drives and Servo Motors
Model / Type Reference:
Linear Brush series: SMA5005-ab-ccc where a may be by 4, S, L, or blank, b may be LB or SF, and c may be 0 to 9 or
A to F, maybe followed by a 1, 2A or 4A. Maybe followed by a 0, 1, 2, 3 or 4.
Linear Brush series: SMA5015-ccc, where c may be 0 to 9 or A to F, followed by 1A-1.
