Page
11
of
30
Rear Panel
Rear Panel Features
8.
Identify Button
This is used in combination with the reset button during software
updates…..see updating firmware for further details.
9.
Reset Button
This is used in combination with the Identify button during software
updates…..see updating firmware for further details.
10.
Copper Ethernet Ports
These 2 copper RJ45 Ethernet ports can accept standard RJ45 cables or
Neutrik Ethercons. Only one port is required to be connected to your network
to correctly pass Dante®/ AES67 network audio, however both the primary
and secondary ports can be used if a redundant network topology is in use.
Both ports are gigabit Ethernet and the LEDs flash to indicate data is being
correctly communicated with a switch.
Identify Button
SFP Ethernet
Slots
Input 1
Connectors
USB
Reset
Button
Copper Ethernet
Ports
Input 2
Connectors
Mains Input
