Page
27
of
33
UPDATING FIRMWARE
The Beatrice M1 is a digital audio system comprising of a Micro Controller and ADC
and DAC converters. These items run software and may need to be occasionally
updated.
Equipment needed
•
A windows based PC
•
USB Type A to Micro B cable
•
A copy of ‘DfuSe Demo’ software
•
The latest firmware from Glensound
•
The Beatrice unit to update
Instructions
1. Download and install DfuSE Demo
‘DfuSE Demo’ is a firmware updating tool that is required for loading new
firmware on to the Beatrice.
It can be downloaded from the STMicroelectronics website found here:
It is the file named
“STSW-STM32080”.
Once you have downloaded this file you will need to extract the .exe
“DfuSe_Demo_V3.0.5_Setup.exe”, then run and install it.
2. Download firmware
The latest firmware for the Beatrice can be found on the Glensound website,
under the product page for Beatrice device. Once you have downloaded the
file, place it in a folder or location of your choice.
3. Connect To A PC
Connect the Beatrice to the PC via the USB cable. The Micro USB connector
is located on the rear panel of the unit.
Figure 1 Example filename
Содержание BEATRICE M1
Страница 20: ...Page 20 of 33 AUDIO BLOCK DIAGRAM...
