GLENCO AIRMAC FU SHENG T20 страница 42 Скачать руководство пользователя | Manualshive

Страница: 42 / 44

background image

Airmac Owner’s Manual

August 2006

© Glenco Manufacturing Pty Ltd

Page 42 of 44

WARRANTY

Proof of Purchase

Please  complete  the  following  details  about  your  air  compressor  for  future  reference
regarding warranty, spare parts and service.

Date of Purchase: ..........................................................................................

Purchased From: ...........................................................................................

Tax Invoice Number: ......................................................................................

Air Compressor Model Number: ....................................................................

Air Receiver Tank Serial Number: .................................................................

Compressor Pump Model Number: ...............................................................

Compressor Pump Serial Number: ................................................................

Engine or Motor Type / Make / Size: .............................................................

It is recommended that you keep a copy of the tax invoice with this manual.

Warranty Conditions

Glenco Manufacturing Pty Ltd (the “Company”)  warrants that the Goods manufactured
by it shall be free from defects in material and workmanship for a period of twelve (12)
months from the date of original sale (hereinafter the “Warranty Period”).  An extended
Warranty  Period  of  twenty-four  (24)  months  total  shall  apply  only  to  the  Fusheng
compressor pump(s) where sold as part of an Airmac air compressor set.

Upon return – transportation charges prepaid by the Purchaser – to the Company’s or
its nominated agent’s premises within the Warranty Period, the Company shall repair or
replace,  at  its  option,  any  Goods  which  it  determines  to  contain  defective  material  or
workmanship, and shall return said Goods to the Purchaser free-on-board (FOB) at the
Company’s or agent’s premises.  The repair or replacement work will be scheduled and
performed according to the Company’s normal work flow and availability of replacement
parts.

The Company shall not be obligated, however, to repair or replace Goods which have
been: repaired by others; abused; improperly installed, operated or maintained; altered
or otherwise misused or damaged in any way.

«
...
40
41
42
43
44
»

Содержание AIRMAC FU SHENG T20













































Отзывы:

Нет отзывов

Похожие инструкции для AIRMAC FU SHENG T20

SALTER AIRE Plus 8350

Бренд: Salter Labs Страницы: 9

Бренд: Gardner Denver Страницы: 87

Бренд: Super Ego Страницы: 8

Бренд: EUROPRO Страницы: 16

Бренд: California Air Tools Страницы: 17

Бренд: Ingersoll-Rand Страницы: 32

JEFC100V10B Series

Бренд: Jefferson Страницы: 20

Бренд: Powerex Страницы: 20

Бренд: Jet Страницы: 68

Бренд: AUSTIN SCIENTIFIC Страницы: 13

Бренд: SereneLife Страницы: 5

Бренд: Spokey Страницы: 32

Бренд: Atlas Copco Страницы: 170

Бренд: Atlas Copco Страницы: 166

Бренд: Atlas Copco Страницы: 178

Бренд: Atlas Copco Страницы: 190

Бренд: WilTec Страницы: 5

Бренд: Campbell Hausfeld Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды