Glen Dimplex 06CHOIAOC6, Инструкция по установке и эксплуатации

Страница: 10 / 36

8 DOK4x HOIAO WxDEN · FD 9912 www.gdts.one
English Air-to-water heat pump 6 kW
4.3 Removing the refrigeration
circuit
To make transport easier, the refrigeration circuit can be dis-
mantled and transported separately. Removing it enables the
indoor unit to be transported horizontally.
The following connections must be disconnected:
1) Disconnect the water circuit connection
2) Disconnect the plug connections on the refrigeration cir-
cuit switch box
3) Loosen the mounting screws
4) Pull the refrigeration circuit out at the side and transport it
to the intended location
!!
ATTENTION!
In installed and dismantled state, the refrigeration circuit may
only be tilted by a maximum of 45° (in each direction).
After the final positioning at the installation location, remove
the transport fastening on the sprung floor of the compressor
on both sides.
!!
ATTENTION!
Before commissioning, the transport fastening must be re-
moved.
1.
(2x)
3.
(2x)
4.
2.
(2x)