GLD Customer Service:
Email: [email protected]
www.gldproducts.com
3. Drill Holes
ON
OFF
2. Mark Holes with Pencil
Stud
1
∕
4
"
1
∕
16
" wide
If mounting to a stud, use
1
∕
4
"
drill bit
If no stud, use
1
∕
16
"
drill bit
4. Tighten Screws
ON
OFF
1. Level Scoreboard
SCREW HOLE
SCREW HOLE
SCREW HOLE
SCREW HOLE
MOUNTING (PHYSICAL INSTALLATION)
The IllumiScore can be secured to wooden dartboard cabinet door or wall using
the 4 screw holes. Select the screws for your application and secure the product. If
you mount the scoreboard on a wall you may need plastic wall anchors. Level the
scoreboard and mark the location of the screw holes on the wall or cabinet with a
pencil. Drill pilot holes at the location of the screw holes. Tighten the screws with
the scoreboard in place.
WALL ANCHORS
Locate a stud and use wood screws or sheet metal type screws to secure the
mounting. If a stud cannot be located or is not in the proper location, use the plastic
anchors and screws. Consult your local hardware store if questions arise.
