GLD Products RENO 7, Руководство пользователя

Страница: 9 / 24

GLD Products RENO 7’ Pool Table
Item 64-0126
9 1-800-225-7593
www.gldproducts.com
STEP 3 - ASSEMBLE THE LEGS
All of the leg sides are the same and can be assembled interchangably.
1. Select two leg sides (#2) and position them as shown.
2. Start two screws (#7) with washers (#9) then tighten with Allen wrench (#24). Repeat
with remaining sides to form 4 legs.
3. Prepare the leg tops (#5) by starting the 4 screws (#8) from the finished side of the top
piece. To make assembly easier, a small length of the screw tips should be protruding
out on the rough side of the leg top.
4. Position the top piece with the screw points in the predrilled holes in the top of the leg
assemblies.
5. Start each screw into the leg. Tighten all 4 screws in each leg using a Phillips screwdriver
and turn the legs over.
6. Prepare the 4 leg bottoms (#6) by starting the 4 screws (#8) from the finished side of the
leg bottom. To make assembly easier, a small length of the screw tips should be
protruding out on the rough side of the leg bottom.
7. Position the bottom piece with the screw points in the predrilled holes in the leg sides.
8. Start each screw into the leg. Tighten all 4 screws using a Phillips screwdriver.
9. Repeat for the remaining legs.
#8
#6
#5
#7
#9
#2
#2
#2
#2
#8