GLD Products 64-6040, Руководство пользователя

Страница: 11 / 18

GLD Products Polar Blast Table
Item 64-6040
9 1-800-225-7593
www.gldproducts.com
STEPS TO OPEN THE TABLE
1. Place the mainframe (#1) on a level surface with the playing side down.
2. Swing one of the legs upward.
TO CLOSE THE TABLE
1. Remove everything from the top of the table.
2. Turn the table over.
3. Remove the leg brace bolts (#2). Swing the leg braces toward the table center and
down.
4. Swing the legs down into the frame of the table.
5. Repeat for the second leg set.
TO LEVEL THE TABLE
Use a carpenters level to adjust the legs as needed until the table is level. The table should
be set-up on a level surface. If the surface is slightly uneven the legs and casters can each
be adjusted about 3/8 inch. The leg adjusters are screwed in or out.
CARE AND USE OF YOUR TABLE
• This product is intended for INDOOR use only.
• DO NOT sit, climb, or lean on the table.
• DO NOT drag the table when moving it. This will damage the legs.
• To clean the hard surfaces spray a cloth with a mild cleaner and wipe.
WHEN TURNING TABLE OVER FOLLOW THESE INSTRUCTIONS
The base assembly is ready to be turned over.
USE AT LEAST TWO PEOPLE TO LIFT THE BASE ASSEMBLY AND TURN IT OVER TO
REST ON THE LEGS.
DO NOT ROLL THE TABLE OVER. This will place a sideways force on the legs. The legs
should be off the floor until the base assembly is rotated completely. Set the base assembly
down.